Sliding Door Operators


Inertia Type Pneumatic Door Operators

inertia

How it Works

Air-Lec Inertia sliding door operators are fast, safe and dependable. This compact two-fisted operator uses one arm to quickly slide large doors, then gently, but firmly checks that motion with the other. Available for sliding doors from five feet to 30 feet wide, speed is easily adjusted and internal cushioning prevents slam.

Uses
  • Fire doors
  • Traffic doors
  • Cooler doors
  • and more!

Experienced Air-Lec Industries staff will provide direct assistance, recommending the right model and accessories (i.e. air filter-regulators, control kits, etc.), to meet your exact needs.

Contact us to learn more
 
Installation Requirements and Specifications

The mechanical contractor will provide an air-line of not less than one-half inch pipe and a minimum pressure of 80 psi to a point within five feet of the center of the door opening. A shut-off valve should be installed on the air line to each door opening.

Every door panel requires one door operator. Every opening requires one control kit and one filter-regulator kit. Extra control stations are available where more than two control stations per opening are desired. Track must be level and door must move freely by hand. Door stops and stay roller must be installed to assure proper operation. A dehydrator is recommended when excess moisture is present.

Download an Inertia Door Operator Specification Sheet

See the Inertia Door Operator in Action!

Over Center Type Pneumatic Door Operators

overcenterdoorphoto

How it works

Often used on fire doors, the Air-Lec pneumatic door operator Model O-260 has an adjustable operating speed and is engineered for two types of doors:

  • Single panel sliding doors up to six feet wide and weighing up to 1,200 pounds
  • Bi-parting doors for openings up to 12 feet wide.

Experienced Air-Lec Industries staff provide direct assistance recommending the right opener and accessories (i.e. air filter- regulators, control kits, etc.), meeting your exact need.

Installation Requirements and specifications

The Over Center type pneumatic door operator is ideal for sliding doors up to 6 feet wide and bi-parting doors with openings up to 12 feet wide. A combination of air pressure and spring tension can be easily adjusted for individual requirements.

Every door requires one door operator per door panel. Every opening requires one control kit and one filter-regulator. Extra control stations are available if desired. Track and accessories are furnished by Air-Lec Industries, LLC. A dehydrator is recommended when excess moisture is present.

Download an Over Center Door Operator Specifications Sheet

See the Over Center Door Operator in Action!